方舟研究磁旋放的实验
今天我从存储中获取了DEC 10电源铁旋子变压器DEC 16-1491 Rev D（部件号）使用了1200V 22.5 UF电容器中的谐振线圈（AC主输入117V 3.8a）444.6w 573v 5.5a 3151.5 w循环功率谐振线圈，如果使用x 2的平面中使用二极管插头，每个电容器将变为半谐振罐电路，变为索引累积器一个负片，如果以顺序脉冲模式放电，则为“谐振”模式。与输入相比，电源很棒。
比在这个变压器循环功率佤邦s over 7:1. All this time we were forced to asume this was a POWER FACTOR phenomena and that this power was not EXTRACTABLE in any way …well not any more with proper tuning and pulsing circuits or simple “spartan” resonant direct connections it can be used, I hope you can find FR transformers or get a standard one 120/240/480V primary 120/240/480V sec and turn the secondary into a resonant tank, transformer will humm and if tunned right will “drift” with input frequency “TUNE” No shunt needed since no core secondary current “regulation” is going to be used.
After this first step try diode plug use x 2 capacity.
注意：电路不会嗡嗡作响！并且输入电流将是无负载值，但是非常谨慎的x 2电压，x 2电流将存在于插头+端子处。脉冲提取到电阻器组的电力，直到系统变谐振（HUMM）最大“Q”如果是POSIBLE。
Try to replicate the FR RC effect and use the diode plug system ,this simple device make many obsolete by all terms.
This is simpler and cheaper than the rotoverter 3PH systems …Transverter systems may be the Volskwagen of OU systems for the money “handicaped” research guy!, transformers are cheap!, capacitors also, BUT I RECOMEND GREAT CARE, DEVICE IS EXTREMELY DANGEROUS if safe parameters are obiated. I give them public …statutory copyright so print and date as original feel free to replicate in vitro.(built prototype) and validate. Any question just ask me! many OPTIONS to extract power are posible.
无论如何，这是最新的1000W灯泡旋转试验，危险OK！don’t even try to make sense of the output readings its a VIRTUAL mess and a theoretic nightmare (normal rules does not apply on 3PH multy-resonant interactions with semy-rectifying loads, Exploded some mercury 1500w GE bulbs like grenades so be careful with the TUNNING of the system if trying to replicate, 100uF at 370V is FATAL to touch.
